Alpine MRX-M110 Mono Power Amplifier (MRX-M110)

( Item in stock! )PDX Inside: An Upgrade with Clear Results

Introducing the new digital X-Power series of Class-D amplifiers. The X-Power amplifiers incorporate many of Alpine’s PDX advanced digital technologies at an affordable price. Don’t let their small size fool you, these amplifiers were specifically engineered to offer performance, sound quality and reliability at PDX standards.

Overview

  • 650 Watts x 1 into 4 Ohms
  • 1100 Watts x 1 into 2 Ohms
  • Class-D, Best Dollar-Per-Watt Performance
  • PDX Technology Inside
  • Sleek Aggressive Design w/ End Caps
  • Voltage ON/OFF Sensing, Non-Fading Speaker-Level Inputs for OEM Upgrade
  • Built-in Crossover, Bass EQ, and Subsonic Filter
  • Remote Bass (RUX-KNOB) Compatible
  • Extremely Low Noise and Distortion
  • Extremely High Damping Factor
  • Reliable No-Shutdown Design

The New X-Power amplifiers offer the best performance in their class, redefining expectations in the affordable amplifier category. Thanks to trickle-down technology, our in-house engineering team has taken many of the patent-pending technologies introduced in the industry-leading PDX series and implemented them in the new X-Power amplifiers. The X-Power amps provide you with the absolute widest bandwidth, best signal-to-noise, lowest distortion and highest damping factor of any amplifier in their class.

Features and Specification

SPECIFICATIONS

CEA-2006 Power Ratings
  • CEA-2006 Power Rating: 650W RMS x 1 (4-ohm, 14.4V at Ƈ% THD+N)
Max Power Output Ratings
  • Max Power: 1900W
RMS Power Ratings
  • Per channel into 4 Ohms: 650W RMS x 1 (14.4V at Ƈ% THD+N)
  • Per channel into 2 Ohms: 1100W RMS x 1 (14.4V at Ƈ% THD+N)
Sound Tuning
  • Crossover Frequency (LPF): 50 - 400 Hz, -24dB/oct.
  • Subsonic Filter: 5 - 30 Hz, -24dB/oct.
  • EQ (Equalizer): 0 to +12dB, fc=50Hz
Dimensions
  • Foot Print (WxHxD) mm: 340 x 58 x 230 mm
  • Foot Print (WxHxD) in: 13-3/8'' x 2-1/4'' x 9''
  • Heat Sink (WxHxD) mm: 280 x 58 x 230 mm
  • Heat Sink (WxHxD) in: 11'' x 2-1/4'' x 9''
General
  • Power Requirements: 14.4 V.DC (11-16V allowable)
  • Input Sensitivity (RCA Input): 0.1 - 4.0 V
  • Input Sensitivity (Speaker Level Input): 0.5 - 10 V
  • Input Impedance: >10k ohms
  • Frequency Response (+0, -3dB: 1W into 4 Ohms) for Subwoofer: 5 - 400 Hz
  • THD+N (10W into 4 Ohms) for Subwoofer: <0.004 %
  • THD+N (600W into 4 Ohms) for Subwoofer: <0.04 %
  • Damping Factor for Subwoofer: >1000
  • Signal to Noise (Rated Power into 4 Ohms) for Subwoofer: 117 dB
  • Preamp Output: 4.0 V Max.
  • Remote Level: -20 to 0 dB
  • Weight: 3.8 kg
FEATURES

Install
  • Terminal Layout: Two-Sided
  • Screw Mount / Wire Cover: Integrated Wire and Mounting Screw Terminals
General
  • Amplifier Type: Class-D (Digital)
  • Channel Design: 1 Channel (Mono)
  • Power Supply Design: DC-DC PWM Power Supply
  • Power Supply: MOSFET
  • Final Outputs: Direct FET
  • Crossover: Variable Low Pass Filter
  • Gain Control: Continuously Adjustable Gain Control
  • Subsonic Filter: Variable Subsonic Filter
  • Bass EQ: Bass EQ Function
  • Bass Control: Remote Bass Control (RUX-KNOB) Ready
  • Low-impedance Possibility: Low-impedance Possibility
  • Current Protection: Over-Current, Over-Voltage and Thermal Protection
  • Board Circuitry: S.T.A.R. Circuit
  • Board Design: 6-layer Glass Epoxy PC Board
  • RCA Output: Non-Fading Pre-Amp Output
  • Speaker-Level Inputs: 4-channel Speaker Level Inputs
  • Power Indicator: Top Mounted Blue LED Power Indicator
  • Thermal Control: Multi-stage Power Limiting

 

 

Alpine MRX-M110 Mono Power Amplifier
Our Price : $450.00  ea
 


Free shipping available for this order!